The FTSs Touch | Nano Jacketed Tank Upgrade kit has been designed to leverage components from the home brewing FTSs Touch line in an effort to provide a low-cost solution to pair a 1, 2, or 3.5 BBL Nano Jacketed Unitank and Nano Brite Tanks with one of the 3/8 HP or 3/4 HP Ss Brewtech glycol chillers.
This system features a custom tri-clamp thermowell adapter, along with a silicone insert to adapt the temperature probe from an FTSs Touch controller to the welded-in sleeved thermowell port on our line of Nano Jacketed Tanks. In addition, a custom-designed low-pressure open silicone check valve is included to prevent backflow to the chiller's reservoir when glycol is not flowing. The kit includes 1/2" NPT to 3/8" barbs to adapt the glycol ports for use with the standard FTSs Touch pump.
Since most Nano Jacketed Tanks are set up for use with a pressurised loop glycol system typically found in commercial breweries, this kit offers a Nano brewery an affordable, easy-to-setup alternative to more elaborate or expensive installations. Everything is included to interface a single Nano Jacketed Tank between an FTSs Touch and Ss Glycol Chiller.
Includes:
- (4) FTSs hose clamp for 3/8" barbs
- (1) Hose barb - 3/8" to 1/2" MPT
- (1) Silicone thermowell cover
- (1) 1.5" tri-clamp sleeved thermowell adapter
- (1) FTSs harness extension 3 ft
- (1) Silicone check valve
Works with 1, 2, and 3.5bbl Nano Jacketed Tanks. Not recommended for 5bbl & larger tanks
Note: not required for Unitank 2.0
From: Ss Brewtech
