Mini duotight Regulator - 6.35mm (1/4'') Suits 16g and 74g Bulbs
Perfect introductory regulator for mini keg / oxebar keg set ups. This compact unit can take 16g and 74g CO2 bulbs. Travellers have never been so easy!
This regulator features a 6.35mm Duotight compatible barb, meaning you can connect just about anything within a matter of seconds. The most common easy attachment to your ball lock kegs would be adding 1 x Duotight 6.35mm (1/4") x Ball Lock Disconnect - (Grey + Red Gas).
If however you want to be a bit more protective with your beer not shooting back into the regulator you could minimise the damage by using a 6.35mm check-valve and some hosing to your ball lock disconnect.
Suitable Gas Cartridges are:
16g Cartridge / Bulbs
74g Big Bulb CO2 Cartridge 5/8-18UNF Thread
Please note, once you get liquid shoot back through it, it's no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out.
This regulator is capped at dispensing 30psi to ensure you do not accidentally over carbonate or exceed your kegs pressure rating. The gauge, however, shows up to 60psi just in case by heat ingress / expansion that it does not break the gauge.
From: Kegland
