Available for pre-order. Order now and we'll dispatch to you when stock arrives mid-November.
This particular kit is a one-click option for those who want to be able to brew double batches under pressure with a 60L All Rounder FermZilla.
Get the highest grossing selling PET Pressure fermenter in the world!
Complete with Red Gas & Yellow Liquid Carbonation Caps, weighted mesh dip tube filter with float. Ensuring that you're getting the clearest possible liquid from your fermenter down to the last drop. It also includes the new and improved Easy-Grip Threaded Lid Ring for ease of tightening and undoing.
The reinforced hex base now comes standard. No more fiddling around with straps and tie downs.
And of course, comes complete with the Red BlowTie spunding valve to allow you to ferment under pressure safely in your new FermZilla.
This brewing kit has been put together by those who want all the benefits of an affordable pressurisable fermentation/transfer vessel, but don't want the extended cleaning times that one would normally do with a Conical FermZilla. That isn't to say that this is better than the others, it is simply the best All Round solution for one with a busy life schedule who also wants to brew the absolute best that they can.
This is the ideal starting point for any new brewer looking to get into pressure fermenting; or simply someone who wants to transfer out of the vessel using pressure to lessen oxygen pick up in their final beverage. The perfect scenario is always going into a stainless steel 19L or 9.5L kegs with Low2 O-Rings post fermentation.
If you don't have any spare keg connectors or tubing lying around you might want to grab grab some separately to create a transfer line.
We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.
What's in the box?
1 x 30L All Rounder FermZilla Base Kit with Easy-Grip Threaded Lid Ring
1 x FermZilla All Rounder Hex Base with 24 x Sticky Dots (Pre-attached)
1 x Red Carbonation Cap (Gas In)
1 x Yellow Carbonation Cap (Liquid Out)
1 x Yellow Weighted Stainless Steel Float with Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth based on what you are fermenting)
1 x Integrated Gauge BlowTie Kit (0-15psi)
Warnings:
Please read the instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.
Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
Product Downloads
FermZilla All Rounder User Guide
Hydro Test Guide
Troubleshooting Leaks and Pressure Issues
Dimensions
From: Kegland
