The FermZilla All Rounder 30L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".
If you want to use this product under pressure we would recommend that you use the pressure kit.
This kit includes:
1 x All rounder tank
1 x Stainless Steel Handle Assembly
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker
1 x Red 2.5bar pressure relief valve
1 x Graduation Sticker
Easy to Clean
This fermenter is made from super smooth PET so it's easy to clean. Just use a small scoop of PBW or similar and wipe it clean after a 5 minute soak. No scrubbing necessary.
Large 120mm Opening
The opening at the top is significantly larger then the older Snub Nose or other similar fermenters. This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg. You can use this fermenter for closed transfers and significantly reduce oxygen exposure.
The wall of the All Rounder is crystal clear so you can see what's going on inside. This makes it really easy to determine visually how the fermentation, how the yeast is flocculating etc.
The PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.
No Flavour and Aroma Carry Over
Other HDPE fermenters tend to be so porous they carry flavour and aroma from one batch to another.
Robust and Difficult to Damage
Impossible to smash like glass. The tank is impact resistant but light weight and easy to use.
IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will melt the tank. Also, while this tank comes pressure tested we recommend that every 2 years you re-hydro test this tank yourself.
Diameter: approx. 352mm
Height: approx. 569mm (from stand base to top of airlock) or 614mm with stand reversed