null Pixel

Ultra-Ferm - 10ml

Ultra-Ferm - 10ml
Ultra-Ferm - 10ml
$8.65
In Stock
$8.65


$8.65
In Stock

Ultra-Ferm is a liquid amyloglucosidase (highly concentrated) from selected classical strain of Aspergillus niger that completely hydrolyzes dextrins into fermentable glucose. It helps eliminate residual sugar, allowing you to achieve a dry flavour profile. Ultra-Ferm is often used to make low calorie or Brut IPA beers.

APPLICATIONS:
1) To reduce saccharification times.
2) To saccharify unmalted cereal brews.
3) To increase attenuation.

FUNCTION IN BEER PRODUCTION:
Brewers often want to produce light beers or dietetic beers. In these cases the brewer wants a controlled or complete hydrolysis of starch and dextrins to fermentable glucose. Traditional brewing methods permit only 75 to 80% hydrolysis of starch present in the grain raw material. Ultra-Ferm amyloglucosidase permits total hydrolysis of dextrins to fermentable glucose, from all types of starch.

In the brewhouse, the recommended application dosage of Ultra-Ferm is 0.8 to 3.2L per ton of starch. It can be added at the beginning of the mash-in. Ultra-Ferm optimal pH is between 3.5 and 5.5. Temperature should not exceed 60°C. Amyloglucosidase activity is completely destroyed when the wort is held at 85°C for 10 minutes.

FUNCTION IN SPIRITS PRODUCTION:
After starch liquefaction by alpha-amylase, dextrins are hydrolysed in glucose by amyloglucosidase, before alcoholic fermentation. Ethanol production is faster and yield is higher. The recommended saccharification temperature is 60°C.

A suitable substrate for saccharification is a liquefied starch with a dextrose equivalent (DE) between 10 and 20. A higher DE than 20 might reduce the saccharification efficiency. The concentration of the substrate will also influence the saccharification efficiency. A concentration of 20-25% is a general practice. ULTRA-FERM dosage, for given reaction time, depends on the amount of glucose requested. It is usually recommended to add 400 ml per ton of starch for a fast hydrolysis. Possible pH range of use is from 3.5 to 5.5 with optimal between 4.0 and 5.3.

Optimal temperature is 60°C. Amyloglucosidase activity is completely destroyed when the saccharified liquor is held at 85°C for 10 minutes. As an example: a yield of 94% glucose can be obtained after 40 hours with 36000 AGI per kg dry matter; after 72 hours with 17000 AGI/kg and after 85 hours with 13000 AGI/kg, at pH 4.5 with temperature 60°C.

From: White Labs, USA

By Kiwis, For Kiwis

Brewshop is proudly New Zealand owned and operated.

10 Years of excellence

Serving the best home brew beer supplies since 2010.

Partners in craft

Supplying brewery equipment from 5 to 50,000 litres.

Fast, Fair Shipping

Simple flat fees, quick dispatch, and secure tracked deliveries.
Cart