The Brew Bucket was the first product from Ss Brewtech, and for many brewers the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, they challenged their engineering team to pair some of the newest technologies with the original design.
The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses the Pure Flow technology, originally developed for the line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, there is a moulded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.
The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into our Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.
The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavours produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.
Full Width Lid
The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.
Summary of features:
- Pro-Inspired Conical base
- Blow off port in lid for airlocks or blow off tubing
- Rotatable Silicone Racking Arm
- Pure Flow Valve for transfers and gravity samples
- 304 Stainless Steel
- 26L (7 gallon) capacity
- 300m Thermowell
- Thermometer | LCD Temp Display Module Dual Temp
- Wide lid with secure spring clamps
- Etched volume markings gals/liters
- Welded carry handles
- Surface safe Silicone Feet
Note: a silicon bung is included but no airlock.
Dimensions: approx. 61cm H x 33cm W x 33cm D
From: Ss Brewtech