Made exclusively for the Duotight manifolds and gen 3.0 Duotight 8mm fittings to be mounted to a flat surface.
These can swivel around if you need to mount on a particular angle once stuck down.
They can also easily be removed from the 8mm Duotight side as they simply click/clamp in to each other.
If you are to mount this inside your Kegerator / Keezer, you must do so when the unit is off / warm. It will not stick as well in a moist / cold environment. Best to give it at least 24 hours of stick time before attaching weight / hosing to it.
Wipe down surface with isopropyl alcohol prior to sticking.
Most commonly to be used with:
8mm (5/16) duotight x 6 Way Manifold with Check Valves & Isolation Valves
8mm (5/16) duotight x 4 Way Manifold with Check Valves & Isolation Valves
8mm (5/16) duotight x 2 Way Manifold with Check Valves & Isolation Valves
and duotight - 8mm (5/16) x 5 Way Multi-Tee
If you want to know if your Duotight fitting will fit this, it must be a grey Duotight that has a black collet piece.
Not suitable for 8mm ball lock disconnects
Not suitable for multiple re-applications
From: Kegland
