Fermentasaurus Fermenter

Fermentasaurus Fermenter Fermentasaurus Fermenter - Valve Fermentasaurus Fermenter - Diagram

The Fermentasaurus is the world’s first conical PET fermenter that is pressurisable up to 2.4 Bar working pressure. This new model of fermenter has only been possible to manufacture using a highly specialised PET grade and a new type of PET injection/blow moulding machine that has been commissioned in Springvale, Victoria, Australia.

Brewers can see the yeast in action as the Fermentasaurus is crystal clear. You can dump yeast from the conical shape and clarify the beer without the need to rack off into another vessel. In the past clarifying beer meant racking from one fermenter to another increasing the risks of infection and oxidation. Don’t waste time and put your beer at risk; now you can ferment, clarify and carbonate in one vessel.

The Fermentasaurus uni tank comes with a yeast 500ml harvesting container that is also pressure rated. The yeast harvesting container is ideal so you can save your yeast from one brew and pitch it into the next brew. Additional collection containers are also available.

The breakthrough in this new design means that customers can finally naturally carbonate their clear conditioned beer in the Fermentasaurus and dispense directly to tap. No need to carbonate beer in the keg or bottle. You can drink directly from the Fermentasaurus saving time and hassle.

The Fermentasaurus has been designed with a sanitary butterfly valve with stainless gate. This butterfly valve has been designed so that no threads are immersed in liquid when the Fermentasaurus is in use. Many fermenters on the market use ball valves which are notoriously difficult to sanitise as the ball valve assemblies have small cavities in them that fill with liquid and are near impossible to clean without disassembly.

With the optional pressure kit you can pressurise the vessel up to 35psi to allow you to carbonate and dispense directly from vessel like a keg! Alternatively, you can transfer under pressure to stainless kegs with practically no exposure to oxygen.

Fermenter Body: High Molecular Length PET
Fermenter Volume: 35L
Dump Valve: Glass reinforced nylon with stainless gate and stainless bolts
Frame: 304 Stainless Frame
Pressure Rated Lid: 304 Stainless Steel Ball Lock Posts, Glass Reinforced Nylon, 2.4 bar (35psi) pressure relief valve
Non-Pressure Rated Lid: Glass Reinforced Nylon
Lid Seal: Nitrile Butadiene Rubber (NBR)
Working Pressure: 2.4Bar (35psi)
Burst Pressure: above 7Bar
Test Pressure: 5Bar

$0.00

Currently out of stock
Add to Wishlist